 Today, 09:26 AM |
#1 |
|
Registered User
Join Date: Nov 2004 Posts: 7 |
ActiveSync via Bluetooth problem I tried searching for this topic; I apologize if it’s been answered, which I’m sure it has. I cannot get my 6300 to sync over BT. When I use the cradle or travel charger, it’s fine. I try pairing the two from the BT manager, and it establishes a connection with the PC, and even has the icon on the 6300, but it seems to only have a “serial port” connection and not an active sync connection. It seems like I had the same problem with my 4155 when I first got it a year ago, and it just started working after much trial and error. Anyone have any ideas? Thanks |
 |
| Today, 12:35 PM |
#2 |
|
Registered User Join Date: Sep 2004 Location: Sydney, Australia Posts: 26 |
When pairing the device, go through the manager, then go to “new”, then add Active Sync paring that way. Should work fine.
Andrew |
| |
| Today, 01:43 PM |
#3 |
|
Registered User
Join Date: Apr 2005 Location: Florida Posts: 46 |
More than likely, the COM port is outside the range that ActiveSync will use. The following guide addresses both that issue and also offers a comprehensive guide. IF you have everything installed and set up jump to the “To re-assign the COM port” section in the middle. REF: http://www.cewindows.net/raj/MSTBluetooth.html > Raj is one of the top ActiveSync people anywhere. In addition, the older Widcomm/Broadcomm software is notorious for port assignment issues. IF you are running XP SP2 then I would recommend using the built-in stack and ditch the extra software; however, unless you have a Bluetooth certified device I’d keep what you have. REF: * XP SP2 (GeekZone example) – http://www.geekzone.co.nz/content.asp?contentid=3163 * XP SP2 (certified devices) – http://support.microsoft.com/default.aspx?kbid=841803 Good Luck – Let me Know! Last edited by David Jaquith : Today at 01:46 PM. |
| |